Re: [Fot] Does anybody remember Cal Cams from Oakland, CA?

[Larry Young via Fot <fot@autox.team.net>]

Why not measure it to see what you've got? The 260 could be an 0.050 
number. See https://www.tildentechnologies.com/Cams/Tips_Takes.html
 Â - Larry


On 7/1/2021 7:49 AM, yellow04 via Fot wrote:
> A club member bought a TR4 street car project from California and the 
> camshaft in the pile of bits is stamped "Cal Cam 260". Not knowing any 
> better, he installed it as a stock cam and is now a little 
> disappointed by the lumpy idle. My first impression is assuming 260 
> implies the duration of the grind, 260 is really mild (like stock!) 
> and should not be all that lumpy.
>
> Does anybody have an old catalogue from Cal Cam? Any specs would be 
> helpful. A cam card for their 260 grind would be really helpful!
>
> Cheers
>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/cartravel@pobox.com
>
>

_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://autox.team.net/archive http://www.team.net/pipermail/fot
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/mharc@autox.team.net