Hi Bob,
Would something like a Moroso 46220 work? Listed as a .563 knurl,
1/2-20 RH, and 3" long. I don't know that the extra .003" knurl diameter
would hurt.
https://www.summitracing.com/parts/mor-46220/overview/
Jason
On Fri, Aug 11, 2017 at 11:30 AM, Robert Lang via Fot <fot at autox.team.net>
wrote:
> Hi,
>
> I have a set of Group 44 hubs apart for replacing the studs. The ones that
> were in there were apparently Moroso 46160, 7/16-20 x 3 with a .560 knurl.
>
> I'm looking for 1/2-20 studs with a similar knurl and would appreciate
> any pointers.
>
> Moroso 46180 is 1/2-20, but the knurl is .615, so I'd have to machine the
> hub flange. I'm trying to avoid machining but I def. want 1/2 inch studs.
>
> TIA!
>
> Regards,
> Bob Lang
> 339-927-4489 <(339)%20927-4489>
>
>
>
>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/jsukey at gmail.com
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170811/3625f4af/attachment.html>
|