Thank you Roland.
Price Lindsay
Cell: 630-841-6300
Email: 050.rpl at gmail.com
Sent from my iPhone
> On Mar 4, 2017, at 1:58 PM, sentenac.rw at gmail.com wrote:
>
> It is a two-part refinishing process. First part is two coats of
> Rustoleum Clean Metal Primer 7780830. Then you apply a very light
> coat of MinWax Polyurethane Clear Satin to seal the surface and make
> it cleanable. Both are spray cans and each can contains enough for a
> dozen cars :-) You don't want the urethane to look shiny. The
> instructions are included with Moss's kit. The primer is a nice
> off-white that Roger found to match the original color.
>
> -Roland
> BN1 #724 with heat shields installed but not ready for the road
>
>> On Sat, 4 Mar 2017 12:24:51 -0500, you wrote:
>>
>> I recall someone mentioning that Roger Moment developed a finish to apply to
>> hardi board to make the finish like the original asbestos. I?ve looked
>> through the archives and on John Simm?s site and can?t find the note. Does
>> anyone know the finish he used or is there someone that can provide me with
>> a proper finish?
>>
>> Thank you in advance.
>>
>> Price Lindsay
>> 67 BJ8
>>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
|