Easy to do. I think they sell different thickness spacers. I made my own based
on the vented rotor I used. Easy and safe. The fluid lines ran outside the
caliper and adjusted to the wider setting or I made new lines. If you have
internal passages, you have to machine a small recess on both sides of the
spacer and use new sealing rings.Barry
On Thursday, February 9, 2017 2:27 PM, Brian Dennis via Fot <fot at
autox.team.net> wrote:
Has anyone ever changed the disc width on a Wilwood caliper? Specifically the
narrow 3.5" mount dynalite/dynapro. It appears Wilwood simply changes the
spacer between the two halves. Thought I would ask before destroying a
set.Thanks,Brian
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170210/cf231f25/attachment.html>
|