Iâ??ve had it act as a lubricant on the gasket. It took me three tries to stop
a leak. I ended up making my own gaskets and using just a thin smear of black
Permatex. If youâ??re using a stamped steel cover, be sure to check the mating
surfaces for trueness. Over time over-enthusiastic mechanics can over-torque
the bolts and deform the cover.
Duncan Charlton
Elgin, Texas USA
> On Aug 25, 2016, at 1:52 PM, Todd Redmond <alfetta95@optonline.net> wrote:
>
> Friends
> Twice now I've installed the diff cover and out oil in it. And it's dripped
> out. I've straightened all the flanges, bolt holes, removed all old gaskets
> and gunk. Still leaks. Is there a problem using black Permetex on both
> mating surfaces along with the paper gasket?
>
> Thanks
> Todd Redmond
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|