I am at 80psi from 3000-6000.
> On Jun 2, 2014, at 9:54 PM, "Tim Murphy" <timmurph@fastbytes.com> wrote:
>
> What oil pressure is typical or desired for the TR4 engine? When the
engine
> is up to temperature, at 3000 to 6000 RPM (typical racing revs) we are
> running 50 PSI.
>
> I was just checking the valve clearance and again I've wondered why a
> tolerance is never given for the clearance. The only time I've ever seen a
> tolerance given was for a 1975 Honda Civic 1200cc engine I rebuilt and the
> clearance was +0.010 /- 0.001. that made sense but it's the only time I've
> seen it in a manual or any place else. Does +0.001/-0.001 really make a
> difference or am I missing something here?
>
> The questions are mainly an engineering curiosity.
>
> Thanks,
>
> Tim Murphy
>
> 1961 TR4 #317
>
>
> [demime found a multipart/alternative section which it tried
> to parse but could not find any section which it could render. Please send
plain text.]
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/ablake2@austin.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|