I pack in until the Permatex begins to ooze from the seams of the block.
Sent from my iPad
> On Oct 30, 2013, at 2:23 PM, "Steve Yott" <tr4@wi.rr.com> wrote:
>
> I use the "Right Stuff" by coating 1" long pieces of the felt and packing
> them into the slots until you can't get any more in. Then shave off the
top
> with a razor blade.....
>
> Steve Yott
>
> -----Original Message-----
> From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
> Behalf Of Todd Redmond
> Sent: Wednesday, October 30, 2013 1:35 PM
> To: FOT@autox.team.net FOT@autox.team.net
> Subject: [Fot] Rear main felt gasket
>
> Fot,
>
>
> What sealant should I use for the rear main felt on the TR3 motor? B I've
> tried 3 auto parts stores and none have the Gasket Shellac. I've already
> made my tool for ramming the felt into the rear main. B Just need the
> sealant.
>
>
> Thanks
> Todd
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4@wi.rr.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|