That's where I buy them, but they don't come in the right OD. If you
do that you'll have to cut them down from 1" to 0.900" OD. We do a
machining operation after purchase.
Tony
At 09:13 AM 6/19/2013, gt6steve@aol.com wrote:
>Go to McMaster-Carr at Mcmaster.com. You can get any variation you desire in
>packs of ten or so.
>
>
>
>-----Original Message-----
>From: Mike Moore <mmoore@wave1.net>
>To: 'FOT' <fot@autox.team.net>
>Sent: Wed, Jun 19, 2013 6:46 am
>Subject: [Fot] TR4 Upgraded Front Axles
>
>
>Anyone know where I can buy the just the shims for the upgrade kit? I want
>o repack bearings and need some extras on hand. I thought they were from
>RE but don't see anything on their website
>
>Thanks
>Mike
>
>Michael T. Moore, CPA
>2007 West 32nd Street
>Erie, PA 16508
>
>Phone: 814-868-4831 ext 103
>Fax: 814-864-7383
>______________________________________________
>ot@autox.team.net
>http://www.fot-racing.com
>Donate: http://www.team.net/donate.html
>rchive: http://www.team.net/archive
>orums: http://www.team.net/forums
>nsubscribe/Manage: http://autox.team.net/mailman/options/fot/gt6steve@aol.com
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|