Have a look at the MOSS 1.5 DEG Negative Camber Vertical links. TT3003
Easy and cost effective!
Kind Regards
Peter Vucinic
TR-4
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Jon Gannaway
Sent: Saturday, 9 March 2013 4:23 PM
To: 'fot@autox.team.net'
Subject: [Fot] Neg. camber on 1964 tr4
I am preparing a 1964 tr4 to vintage race in California. I am looking for
simple and easy ways to get negative camber in the car. Any suggestions
would be helpful.
Jon Gannaway
831-402-4080
Disclaimer: The information in this e-mail transmission, or the documents
accompanying this e-mail transmission, may contain confidential health
information that is legally protected by state and federal law, including,
but not limited to the Health Insurance Portability and Accountability Act
of 1996 and related regulations. This information is intended only for the
use of the individual or entity to whom this e-mail transmission is
addressed. If you are not the intended recipient of this information, or if
you are not properly authorized to receive this information, you are hereby
notified that any disclosure, copying, distribution or action taken in
reliance on the contents of this e-mail or the attached documents is
strictly prohibited. If you have received this information in error, please
notify the sender immediately by sending a reply e-mail indicating that you
have arranged for the deletion of this e-mail and a destruction of this
e-mail and any attached documents.
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|