fot
[Top] [All Lists]

Re: [Fot] TR coolant pressure/flow

To: <BillDentin@aol.com>, <ablake2@austin.rr.com>, <fot@autox.team.net>
Subject: Re: [Fot] TR coolant pressure/flow
From: "Bill Tobin" <william.tobin31@verizon.net>
Date: Fri, 08 Feb 2013 13:09:39 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: fot@autox.team.net
References: <10696.7536775c.3e4681cf@aol.com>
I agree, Bill.
On my TR6 engine, where the the heater pipe comes out of the head at the 
rear, I removed the pipe and installed a petcock for bleeding out air.
Easy to do and it seems to work.
Of course, I don't have a heater in the car.
Bill
----- Original Message ----- 
From: <BillDentin@aol.com>
To: <ablake2@austin.rr.com>; <fot@autox.team.net>
Sent: Friday, February 08, 2013 11:29 AM
Subject: Re: [Fot] TR coolant pressure/flow


> Greg...
>
> While Tony Drews provided some bench mark numbers for you, I can'l help 
> but
> chime in with the importance of a good "bleed" technique for every time 
> you
> drain and refill your system.  If you do not bleed properly, you will end
> up dealing with air pockets and bubbles.  Kas has told me that even when 
> he
> had trusted assistants on his race teams...'filling the cooling system' 
> was
> one thing he always did himself.  That's saying something, and is an
> indication of its importance with our TR engines.
>
> Bill Dentinger
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>