I used a Craftsman socket with a small end that steps down. It worked great as
a swaging tool.
Multiple light taps to move material.
Of course you can only do the top.
I am sure some will also say to use carb cleaner at the tubes and add some
sealant of some kind.
Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711 (cell)
n197tr4@cs.com
-----Original Message-----
From: Ken Suhre <kenandtweety@yahoo.com>
To: FOT <fot@autox.team.net>
Sent: Sun, Jan 27, 2013 8:18 pm
Subject: [Fot] Pushrod tube leaks oil
I have searched the Archives for a solution to this problem my TR4. Has anyone
fixed this problem without pulling the head? I would like to stop the leak
either with the head on the engine or as a last resort pulling the head.
Ken Suhre
1969 TR4 #79
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|