FoT
With the rods I have, in order to seperate the caps I have to back out the
bolts
a few turns and tap the bolts with a soft mallet to seperate them.
I use plastigauge to check my main clearances but it seems that tapping
on the rod bolts may tend to affect a plastigauge measurements on the rod
journals. I'd appreciate any feedback on checking rod clearances.
Thanks as always,
jim g
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|