You can use the SS braided lines with hose clamps. There is a cover to mostly
hide the hose clamps. I am not sure how to adapt AN fitting to the S.U.
Chris
On Jun 9, 2011, at 10:16 AM, marty sukey <trmarty@hotmail.com> wrote:
> Looking at the rubber hoses and associated hose clamps in the engine
> compartment of the Spitty, thinking there has to be a better/safer way. I
> think the way to go would be SS braided line and AN fittings. Question is,
> how would you tie into the fuel tubes sticking out of the 1-1/4 S.U.'s?
Any
> advice out there?
>
> Thanks,
> Marty
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/seacubeco@aol.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|