Hello All,
I have a question concerning my ignition - it's a Mallory Dual Point
distributor with mechanical advance and a Crane FireBall Hi-Output Coil PS92
(?). All are in good condition and set according to my engine tune with fresh
plugs. When testing for a misfire, pulling one plug wire at a time, I found
the following condition : if I pull the plug wire for number 1 or number 4
cylinders there is a very noticeable change in the engine's idle. If I pull
the plug wire for number 2 or number 3 cylinder there is little to no change
in the engine's idle. There is a spark there but not as big the spark at
number 1 and 4.
Serious diagnosis will be most appreciated, or at least a direction of where
to start looking.
Spitfire looking for power,
Bob T.
'64 Spit GT autocrosser
=
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|