Check out Hawk brake pads. You will want to check application charts but If I
remember correctly part #HP 169560s ht10 compound for all out racing. I believe
this is the same pad as the 240z. A few of their parts were copied from the TR
and cross over (brakes/wheel bolt pattern).
Mike
Sent from my iPhone
On May 25, 2010, at 10:25 AM, Joe Henry <jhd11@hotmail.com> wrote:
To add to the brake discussion;
As some of you may or may not know, we are building a TR6 to go Chumpcar
Racing (same principal as Lemons). We will be using, initially at least,
stock discs,drums and calipers. Since it is endurance racing we will need
several sets of brake pads. Are there any off the shelf performance pads for
the 6 that will work. I spoke to the Carbotech people and they can have a pad
that will work but a lot of $$! Thanks in advance.
Joe Downer
RiffRAF Racing
Charlotte, N.C.
_________________________________________________________________
The New Busy think 9 to 5 is a cute idea. Combine multiple calendars with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multicalendar&ocid=PID283
26::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_5
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/fasttrs@yahoo.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|