<< I still largely have the original metal thingies though.>>
As do I. I just try to bend mine in a different part of the
strap-thingie whenever I use them.
Scott
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Tony Drews
Sent: Monday, January 05, 2009 9:38 AM
To: fot@autox.team.net
Subject: Re: [Fot] Metal Question
For areas where the wires / tubes / whatever go in and out frequently,
Velcro can be handy. I still largely have the original metal thingies
though.
- Tony Drews
At 09:02 AM 1/5/2009, Robert Lang wrote:
>On Sun, 4 Jan 2009, Justin Wagner wrote:
>
>>Sacrilege!!!
>
>I'm not 100% sure, but I recall that TRF had new cable tie thingies
>made so you could weld in new...
>
>But if it's a race car, you want to make it serviceable above original.
>And if you can make it easier to work on, so much the better.
>
>rml
>
>p.s. I'm with Rocky on this one, although I do admit that I use some of
>the wire ties that Triumph provided in my race car.
>
>-----------------------------------------------------------------------
----
>Bob Lang NER/SCCA | This space for rent
>Solo Chair 2008 TR6 40 F Prepared | Triumph!
>Voice:781-438-2568 FAX: 617-258-9535 | Cell: 339-927-4489
>-----------------------------------------------------------------------
>---- _______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot@autox.team.net
>http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|