my shop manual says the minimum thickness for the disc is 0.460, though I
have run them below that with no warpage at the track.
I don't see a spec for the drum max. ID
----- Original Message -----
From: <GRMTim@aol.com>
To: <fot@autox.team.net>
Sent: Sunday, November 09, 2008 8:14 PM
Subject: [Fot] Specs for GT6 drums and rotors
> As I work on this 1969 GT6 I was wondering what the spec is for rotor
> thickness and rear drum thickness? Figured I could at least save the old
> ones for
> spares if they were in spec, but haven't been able to find what that spec
> is.
> Thanks.
>
> Tim Suddard
> Publisher; Classic Motorsports
> and Grassroots Motorsports magazines
> www.classicmotorsports.net
> www.grassrootsmotorsports.com
> Phone: (386) 673-4148 Fax: (386) 673-6040
>
>
>
> **************
> AOL Search: Your one stop for directions, recipes and all other
> Holiday needs. Search Now.
>
>(http://pr.atwola.com/promoclk/100000075x1212792382x1200798498/aol?redir=http://searchblog.aol.com/2008/11/04/happy-holidays-from
> -aol-search/?ncid=emlcntussear00000001)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|