I have had to make minor "adjustments" with a file on all three of the
cranks I have used. All three were short tail shaft cranks and used with the
same I-J scraper and oil pan.
Mike
#28 EP TR6
-----Original Message-----
Terry O from Australia indicates that there are three possible
configurations
of TR6 Crank Shafts that may affect the application of the I - J Scraper.
I suspect the variations are very minor and less of an issue with Teflon.
But
it is somethat that I - J will want to be aware of.
(Note: all but two orders for TR6 Scrapers include the Teflon Option.)
Any insight that TR folks have on these configurations would be appreciated
and DOCUMENTED.
Thanks!
Joe Alexander
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|