I tried to find the installation instructions that came with the MSD6! I
currently use but could not locate it. I will keep looking.
However, I did run across a coil compatibility list which may explain some
failures.
But I remember quite clearly the Plug Wire issue because I called The MSD
tech support to ensure that the ones I decided on would not damage the unit.
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Randall
Sent: Wednesday, July 02, 2008 2:42 PM
To: 'Amici Triumphi'
Subject: Re: [Fot] MSD units
> The old carbon core wires are not sufficient. MSG explicitly stipulates
> that you should only use Helically wound suppression wires with their
> units.
Even the instructions posted today on their web site do not say that for
MSD5 units (the one that went thermally intermittent on my motorhome).
And I'm fairly certain (though I don't have them handy to check) that the
instructions I originally received with the 6A did not say that either.
But thanks for the tip.
Randall
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|