The reason for using a 2 row core is that the more tubes are in a row....the
first row gets fresh cold air, the 2nd gets heated air, and all the
following rows get warmer air than the previous ones.
So why using a 4 or 5 row core when from tube 2 on you are carrying around
useless weight that does cool only 5-10 percent.
So my idea is to use a radiator that does cool with less tube rows. I tried
to find a radiator that is wide as the inlet is. The tubes should be very
flat so that there is no drag. Round tubes in a core are the dead of any air
flow.
Cheers
Chris
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|