I just got flywheel bolts from ARP for my aluminum flywheel
----- Original Message -----
From: <N197TR4@cs.com>
To: <fot@autox.team.net>
Sent: Tuesday, April 22, 2008 9:44 AM
Subject: [Fot] Flywheel Fasteners for Steel Flywheels
> FOT,
>
> The steel flywheels are arriving at their intended destinations and I have
> been asked what I would recommend for fasteners.
>
> What doth the list sayeth?
>
> This is a worthy question. I use a particular fastener (4) with Loctite
> and
> no washers or locking tabs.
>
> It would be good to see a consensus on keeping this rotating mass in
> place. I
> likely have no more than 125HP and seldom go beyond 6,000 RPM. Thus, the
> answer maybe different for others.
>
> Joe A </HTML>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as s.janzen@comcast.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|