Hi, Summit has several; pn CRR27902-5, Crager $11.69/per5 or ARE 881140,
American Racing, $1.50ea. 7/16 threads. Also other nuts and wheel lugs.
Also, I chucked up in my lathe the lug nuts that came with my Panasports
(they were closed-ended), cut off the end, and tapped the threads clear
through. That way I can use longer studs on the Good hubs I bought. (I took
the advice I'd been given about stock TR6 rear hubs....not if but when they
break....).
Pegasus, 800 688-6946, also hus studs and lug nuts. As does JEGS. No
financial interest with any of the above
Good luck.
Bill Tobin Erie, PA Vintage TR6.
----- Original Message -----
From: <robertten1@aol.com>
To: <fot@autox.team.net>
Sent: Thursday, March 20, 2008 11:06 AM
Subject: Re: [Fot] wheel studs
> Just my 2 cents,
>
> Has anyone looked into the big 2 racer suppliers ... Summit & Jegs ?
>
> Bob T.
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as william.tobin3@verizon.net
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|