Hadn't finalized my decision on the pistons yet. You have to deck the
block down more; one block I have is already decked for TR6 pistons
and has billet caps, so I can't go back on that one; but another is
set for .040 stock; So it will likely be yes on one, and no on the
other.
Thanks
-Scott Cypher
spitfireracer@xsmail.com
SCCA #57 HP Spitfire 1500 #362573
Reading, PA
http://gallery.mac.com/srcypher
Shipwright's Disease. Its a nasty affliction, particularly when
owns a british car. Then it can never be cured.
On Feb 22, 2008, at 7:58 PM, fpspitfire@insightbb.com wrote:
I get home tomorrow and I'll look at all my heads.
Piston Rings arrived today. I now have everything I need to finish
the engine except the clutch pressure plate (thanks Joe).
Should have the motor together this weekend and in the car with
everything hooked up except the front shocks.
are you going to go with the TR6 pistons in the motor? I've talked
to a few people and noone is really doing it any longer. new cams
seem to have changed any benefits.
aaron
----- Original Message -----
From: Scott Cypher <srcypher@mac.com>
Date: Thursday, February 21, 2008 21:20
Subject: Re: [Fot] 1500 heads
To: John Kipping <johnkipping@inet.net.nz>
Cc: fpspitfire@insightbb.com, spitfires@autox.team.net,
fot@autox.team.net
> I have a stock 218139 head that has 1.44 valves in it; but I
> also
> have 515973/573 FP prepped heads that have 1.44 valves, and
> one
> TKC2748 head with 1.44 valves.
> John, what are the real differences in the heads (515xxx vs.
> 218xxx
> vs. TKCxxxx) if any?
>
> Thanks
>
> -Scott Cypher
> spitfireracer@xsmail.com
> SCCA #57 HP Spitfire 1500 #362573
> Reading, PA
> http://gallery.mac.com/srcypher
>
> Shipwright's Disease. Its a nasty affliction,
> particularly when
> owns a british car. Then it can never be cured.
>
> On Feb 21, 2008, at 3:40 AM, John Kipping wrote:
>
> I think I must have serious problem, off the top of my head
> there were
> four large valve heads - 218139, 218140, 218141, 218142. (it's the
> remembering the numbers that's the problem). I think they are 1500LC,
> 1500HC, 1300LC and 1300HC respectively. Somebody tell me I've
> got these
> the wrong way round before I go and get help from a shrink -
> it's eight
> years since I stopped with Triumph spares. aaaaargh
> John Kipping
>
> fpspitfire@insightbb.com wrote:
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|