fot
[Top] [All Lists]

Re: [Fot] TR6 Gearbox

To: fot@autox.team.net
Subject: Re: [Fot] TR6 Gearbox
From: Catpusher@aol.com
Date: Fri, 21 Sep 2007 18:47:45 EDT
I spent quite some time blueprinting the TR3B/6 gearboxes for racing.   The 
late laygear with "c" clips to help retain the (rear) laygear brg. is a good  
thing, and TRF supplies a slightly longer torrington lay brg, which is also  
good.  I would check the hardness of any new layshaft.
With Redline oil, I really flogged this gearbox with fine  reliability.  Do 
check and safety wire the top cover wedgelocks.  I  used the modified CR 
gearsets from the Dolomite Sprint (can not quite  picture TR7 gears in the big 
TR 
box)
I did run many seasons with the 7 speed overdrive setup before scca allowed  
alt. gear ratios for the TR3.
 
The Stag gearbox has a 2 diameter layshaft, so there is a larger ID for the  
2 rear lay bearings; it also has nifty needle layshaft thrust bearings. Do not 
 believe the stag manual about drifting the layshaft out the front of the  
case!  The standard input shaft is too long for TR use.
 
Hardy


 



_______________________________________________
http://www.team.net/donate.html

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>