In a message dated 03/26/2007 10:32:57 AM Central Standard Time,
billb@bnj.com writes:
> It would be a pretty big or specialized shop to have EDM stuff. It's
> a nut. It will come off. If worse comes to worst, use a chisel
> against the edge of the flats. It helps if you make a nick with a
> sharp chisel and then use a dull one to apply torque. Big Big F*&%
> $ing Hammer (BBFH) and a bit of technique. Just be sure you're
> loosening the nut, not tightening it.
>
'Righty Tighty...Lefty Loosey"
Bill (Damdinger)
**************************************
AOL now offers free email to everyone.
Find out more about what's free from AOL at http://www.aol.com.
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|