I guess I fit in the totally crazy realm then!
The car has changed a bunch since you last saw it Bill!
Aaron Johnson
#87 HP Spitfire 1500
Southern Illinois Region SCCA
----- Original Message -----
From: Bill Babcock <billb@bnj.com>
Date: Thursday, February 1, 2007 15:50
Subject: Re: [Fot] Clutch Plate
To: Ron Jones <earthron@yahoo.com>
Cc: fot@autox.team.net
> Sounds like somebody built a close ratio box in your case. I
> have one
> just like that from the esteemed Mr. Prentice. You can get the
> right
> plate from a variety of sources. I think it's a GT6 or a
> Vitesse
> plate, but my memory sucks. talk to the guys at Moss or Brit
> Parts
> Northwest (google them) and I'm sure they'll have what you need.
> Or
> go nuts and put in a two plate rally clutch and coaxial
> actuator.
> Nah... You'd have to be totally crazy to do that.
> On Feb 1, 2007, at 9:54 AM, Ron Jones wrote:
>
> > A few months ago I bought a TR4 race car and have run into
> a
> > problem. The spline's on the input shaft on the transmission
> are
> > 1" in diameter. The the clutch plates I have for stock
> TR2,3,4,
> > and 6 all fit a 1.25 diameter shaft. The transmission case
> is
> > stamped CC 80444 and there are additional numbers of 11 RR
> 77 and
> > either DB D7 or D3 D7 stamped below the CC#. Any idea what I
> have
> > and where I find a Clutch Plate for it?
> >
> > Ron Jones
> >
> > '58 TR3A Disassembled - Last raced 1972
> > '63 TR4 Race Car
> >
> >
> > ---------------------------------
> > Looking for earth-friendly autos?
> > Browse Top Cars by "Green Rating" at Yahoo! Autos' Green
> Center.> _______________________________________________
> > Fot mailing list
> > Fot@autox.team.net
> > http://autox.team.net/mailman/listinfo/fot
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|