Draining the radiator will get rid of electrolyte solution. In long term
situations using a Zinc sacrificial anode in the radiator could help. There is
a company making these..."Radcap" perhaps if you google it you will find out.
As I recall if you have a sensitive enough volt meter you can measure the
galvanic potential if you put one probe in the coolant solution and the other
on the block. I have never done this personally. It is not worth the time
save for a science experiment.
m
M.N.Dunst
Gasket Works USA, LLC
gmt-8 Pacific time
626.358.1616 voice
626.628.3777 fax
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|