My TR6 at the last race (Production Festival at VIR) weighed 2213 with me in
the car 205#. It has a fiberglass bonnet and 4 fenders. I finished with7.5
gal of gas which should weigh 45#. If I put on the fiberglass trunk lid I
will shed 38#. So, without fuel, chunky driver and ballast my car should
weigh 1925#. SCCA required weight is 2190.
Mike
-----Original Message-----
From: owner-fot@autox.team.net [mailto:owner-fot@autox.team.net] On Behalf
Of SHANE Ingate
Sent: Wednesday, November 08, 2006 4:06 PM
To: gtlund@cyberspeedway.net
Cc: fot@autox.team.net
Subject: Re: [FOT] TR250/TR4 weight
Greg Lund wrote:
>A few years ago I weighed my TR250 when it was in pieces (still is)
Weighed Rags (TR6) on calibrated grain scales (apparently much more
accurate than electronic) and came up with the following:
LF: 479 lbs RF: 494
LR: 430 lbs RR: 435
Total = 1837 lbs
(with no interior, no battery, no electrics, no bonnet, no driver, no
fluids).
I figure the bias on the RHS to be due to the Webers.
Now if I can get the driver down 16 lbs to his fighting weight of 155, I may
have a chance of pulling the skin off a rice pudding.
Shane Ingate in Maryland
_________________________________________________________________
Add a Yahoo! contact to Windows Live Messenger for a chance to win a free
trip!
http://www.imagine-windowslive.com/minisites/yahoo/default.aspx?locale=en-us
&hmtagline
|