[FOT] Clutch slave cylinder

fot

[FOT] Clutch slave cylinder

To:	fot@autox.team.net
Subject:	[FOT] Clutch slave cylinder
From:	m-syork@comcast.net
Date:	Wed, 09 Aug 2006 23:43:25 +0000

This is a little off subject but, has anyone tried Herman Van Den Akker's 
hydraulic throw out bearing? In a racing application? It seems like it would 
clean things up a bit on the left side of the motor with the oil filter, 
sandwich for remote oil cooler, oil lines, distributor, and the slave cylinder.
Just wondering
Mark

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[FOT] Clutch slave cylinder, m-syork <= RE: [FOT] Clutch slave cylinder, Bill Babcock Re: [FOT] Clutch slave cylinder, Joe Boruch Re: [FOT] Clutch slave cylinder, Chuck Arnold Re: [FOT] Clutch slave cylinder, N197TR4 Re: [FOT] Clutch slave cylinder, R. John Lye Re: [FOT] Clutch slave cylinder, Hugh Barber Re: [FOT] Clutch slave cylinder, R. John Lye Re: [FOT] Clutch slave cylinder, m-syork Re: [FOT] Clutch slave cylinder, R. John Lye Re: [FOT] Clutch slave cylinder, Robert M. Lang

Previous by Date:	RE: [FOT] Clutch Slave Cylinder -TR4, Randall Young
Next by Date:	RE: [FOT] Clutch slave cylinder, Bill Babcock
Previous by Thread:	RE: [FOT] Clutch Slave Cylinder -TR4, Kramer, Robert
Next by Thread:	RE: [FOT] Clutch slave cylinder, Bill Babcock
Indexes:	[Date] [Thread] [Top] [All Lists]