Charly, Ken Gillanders at BFE is the distributor for both kits and spare
parts, if he doesn't have the spacers I can ship him some. A new run of
axles is planned for December, Ken has about 15 orders. If anyone is
interested please let him know since it will be awhile before they run
again.
Ken, my apologies for not getting back to you directly regarding production
status, life is a little crazy these days.
Mark Weathers
>From: "Charly Mitchel" <charly@mitchelplumbing.com>
>Reply-To: "Charly Mitchel" <charly@mitchelplumbing.com>
>To: <CHUCK.ARNOLD@oracle.com>, <fot@autox.team.net>, "Mark York"
><m-syork@comcast.net>, <GRMTim@aol.com>, "'Bill Babcock'"
><BillB@bnj.com>
>Subject: Re: Aluminum front hubs
>Date: Fri, 14 Oct 2005 12:49:53 -0700
>
>So, if I order the aluminum hubs from Jack, I'd need to get different
>spacers for my uprated axels from Mark. Right
>Charly
>TR6 #44
>----- Original Message -----
>From: <CHUCK.ARNOLD@ORACLE.COM>
>To: <fot@autox.team.net>; "Mark York" <m-syork@comcast.net>;
><GRMTim@aol.com>; "'Bill Babcock'" <BillB@bnj.com>; "'Charly Mitchel'"
><charly@mitchelplumbing.com>
>Sent: Friday, October 14, 2005 11:23 AM
>Subject: RE: Aluminum front hubs
>
>
> > The ones for the Southwick hub are the "Mark Weathers" design. MArk
>made
>the set I have. He did not want to be in the sales business, So Ken sells
>them. Not sure what the supply status is these days.
> >
> > Pictures of the axels and hubs available upon request.
> >
> > Chuck
|