RE: Rear Trailing arm bushes IRS cars

fot

RE: Rear Trailing arm bushes IRS cars

To:	"Gerald M Van Vlack" <jerryvv@alltel.net>, "fot"
Subject:	RE: Rear Trailing arm bushes IRS cars
From:	"barry rosenberg" <britcars@bellsouth.net>
Date:	Wed, 5 Oct 2005 09:06:14 -0400

     I simply chuck the poly mounts, front or rear, in my lathe; spin at
high speed and trim them so the steel sleeve is longer than the bushing. I
agree with not using all poly type mounts on a "normal" street car as the
ride gets harsh and all the shock is constantly transmitted to the frame and
body. Most of the time I will leave either upper or lower bushing made of
rubber. Makes a very uncomfortable ride when all are hard poly type..
Barry

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Rear Trailing arm bushes IRS cars, Gerald M Van Vlack RE: Rear Trailing arm bushes IRS cars, barry rosenberg <= Re: Rear Trailing arm bushes IRS cars, Gerald M Van Vlack RE: Rear Trailing arm bushes IRS cars, Bill Babcock RE: Rear Trailing arm bushes IRS cars, Randall RE: Rear Trailing arm bushes IRS cars, Robert M. Lang RE: Rear Trailing arm bushes IRS cars, barry rosenberg RE: Rear Trailing arm bushes IRS cars, Bill Babcock RE: Rear Trailing arm bushes IRS cars, Coffey, Jack Re: Rear Trailing arm bushes IRS cars, WEmery7451 Re: Rear Trailing arm bushes IRS cars, BOB KRAMER RE: Rear Trailing arm bushes IRS cars, Jim

Previous by Date:	Rear Trailing arm bushes IRS cars, Gerald M Van Vlack
Next by Date:	Re: Rear Trailing arm bushes IRS cars, Gerald M Van Vlack
Previous by Thread:	Rear Trailing arm bushes IRS cars, Gerald M Van Vlack
Next by Thread:	Re: Rear Trailing arm bushes IRS cars, Gerald M Van Vlack
Indexes:	[Date] [Thread] [Top] [All Lists]