hello,
this is the mail adress of the Revo.. wheel manufacturer. warren.rdt@uku.co.uk
Warren may can help?
Chris
----- Original Message -----
From: "Timothy F. Murphy" <timmurph@execpc.com>
To: "Glenn Franco" <gaf3@charter.net>
Cc: <fot@autox.team.net>
Sent: Thursday, July 07, 2005 3:36 AM
Subject: Re: Revolution/Revolite Wheels
> I also need some sleeve nuts and washers for the Revolution wheels on our
> car. We need 2 inch long sleeves by 5/8 inch outside diameter with a 7/16-20
> inner thread. I tried e-mailing two places in England and Mid-Atlantic
> Motorsport and SSP Motorsport in the US after doing an internet search. All
> of these places supposedly had the sleeve nuts. Got one reply from England to
> try in the US. I will try the suggested places. Please let me know if you
> have any luck.
>
> Tim Murphy
> TR-4 CT511
>
> Glenn Franco wrote:
>
> > I have two sets of revolution/revolite wheels for my Spitfire race car
> > and I'm looking for a source for the shoulder style lug nuts.
> > The studs are 7/16" dia thread with a 5/8" diameter shoulder ~1 1/2" long.
> > Does anyone out there know of a source for these? They are like the old
> > mag wheel nuts with the hardened washer from the 60's through 80's. They
> > are still sold in England.
> > I have been scouring the internet with not much success.
> > Any help would be appreciated.
> > Glenn Franco
> > 73 Spit race car
> > 77 Spit
> > 70,71,74 TR6's
> > TR250
> >
> > _____________________________________________________
> > This message scanned for viruses by CoreComm
|