Steve,
If I had not just spent the 300 bucks to have the Stock radiator recored, I'd
jump at your offer. I have the stock Mk1 header tank
already on the engine so that part wouldn't matter.
Oh well that's just my usual luck!
Joe
Gt6steve@aol.com wrote:
>
> Greetings all,
> I made a slight error last month when I ordered an aluminum radiator to be
> made up for my GT6 by AFCO racing. I specified it to measure 12"x23"x3".
> Trouble is that I needed 11" tall and now I can't fit this beautiful bit of
> work under my hood.
> The dimensions of this Rad make it perfect for a Spitfire. It would fit in
> the stock frame and save a few pounds up front. There is one caveat however,
> it was built with no filler on the tank so would require a swirl pot or
> header tank on the firewall.
> If anyone is interested I'll pass it on for $300.00 and I'll cover the
> shipping
> Steve
|