I wouldn't bother drilling any holes.
I am in the same situation, the holes were filled when the boot lid lip
was repaired.
Since the mounting screws thread into the trim piece I intend to bond
the handle to the lid lip using polyurethane adhesive.
You can usually see the 1/2 circle cutouts for the screw holes on the
inside of the boot lid.
Mount it with the lock cutout symmetrical with the boot lock and it will
look dandy.
It doesn't do much work after all.
Regards,
Graeme S.
nissanman.shutterfly.com
On 4/11/2014 04:03, Daniel Heinze wrote:
> The PO of my 68 roadster removed the trunk handle trim piece, welded up the
> mounting holes and repainted. I have the trim piece and want (after 25
> years) to replace it, but I don't know exactly where and at what angle to
> drill the holes. Any advice or pictures would be appreciated.
>
> Thanks
>
> -Dan
> '68 2000 Solex
> ________________________________________
>
> datsun-roadsters@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/datsun-roadsters/graemes@internode.on.net
________________________________________
datsun-roadsters@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/mharc@autox.team.net
|