For Hitachi dist. gap is 0.45 - 0.55mm or dwell of 50 - 54deg.
For Mitsubishi dist. gap is 0.45 - 0.55mm or dwell of 56 - 61deg.
Reference: - SP[L]311 Service Manual
:-)
Regards,
Graeme Suckling
http://tinyurl.com/6n5aza
Adelaide
South Australia.
On 5/01/2013 5:05 PM, Roy Haslett wrote:
> I have set my dwell using a meter and with the starter motor turning it is 52
> degrees. Timing is set with timing light at 16 BTDC. When the car is started
> and idling at 600-700rpm the dwell shows 58 degrees. When rpm is increased to
> 3000 rpm dwell drops to 50 degrees. Is this correct and within specs?
> ________________________________________
>
> datsun-roadsters@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
> http://autox.team.net/mailman/options/datsun-roadsters/graemes@internode.on.net
________________________________________
datsun-roadsters@autox.team.net
Archive: http://www.team.net/archive
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/mharc@autox.team.net
|