Formuling France made a 1600/2000 hub adapter for their wheels, which
were fixed to the hub by 9 countersunk cap screws.
The Formuling France adapter for the 1600/2000 is p/n 761390.
I had tracked this issue down in 1998, out of necessity, and found that
Performance Marketing at 714/799-9177 was the exclusive US distributor.
At that time, they had -- 24 -- Datsun 1600/2000 hubs on the shelf,
after I bought the one I needed.
- Bob Mann, '68 2000 Solex
limprod wrote:
>One more thing to contribute here -
>
>The only aftermarket steering wheels that are known (to me anyways) were
>from Grant, Sparco and Momo and copies of the former. Grant has a 5 bolt
>pattern while Sparco and Momo have the same identical 6 bolt pattern. All
>require the respective bolt pattern hub to adapt to your car.
>
>On that note, if anyone has an extra Momo/Sparco hub pls contact me off
>list. Momo #3500(?) is NLA from the factory and remaining stock has
>disintegrated faster than <too tired to think of a smart --- remark>.
>Thanks. The Roadster might be more fun if the wheel was actually attached.
>
>
>Has anyone tried an alternate, say a 510 or 240Z?
|