Re: Coughing/hesitation problem

["Stephen Wan" <Steve@olsonarchitect.com>]

Thanks for all the replies.
I'll try adjusting the mixture first since as suggested.
I seem to run a little warm (needle just on the right edge of the fahrenheit
mark) although I have no fan shroud..
The dizzy weights and springs have been replaced w/ non smog items allowing
me to run some advance, I but still need to run high octane to prevent
pinging.  Maybe I could also disconnect the vacuum advance as well, but it
sometime pings when flooring it from 3k rpm, so that may not help.

Steve
70' 1600