Re: lower a-arm bushings

[Chris Coker <chriscoker@comcast.net>]

I've always had good luck with clamping the arm in a vice, using the 
correct socket ( 1 1/4"???), a 3/4" breaker bar, and a 5' long breaker 
bar "extension."


---
Chris Coker
1969 1600 Street Car (SPL311-24529)
1966 GP SCCA Race Car www.risensonracing.com


On Oct 29, 2003, at 12:26 PM, datsunmike wrote:

> You need a big ass impact gun and plenty of heat to remove the 
> bushings.