Ben is right. Ross has them on his web site as do some of the other vendors
(I believe Rallye does as well, but I am not sure.)
Sid
>From: "Ben Zech" <motormite@hotmail.com>
>Reply-To: "Ben Zech" <motormite@hotmail.com>
>To: rulee@cityscape.net, aryasu19@idt.net
>CC: rsimmons2@home.com, datsun-roadsters@autox.team.net
>Subject: Re: NTFMF old roadster lingo x-mac-creator="4D4F5353"
>Date: Wed, 15 Nov 2000 17:37:13 GMT
>
>floor pans are available from vendors I believe........
>
>
> >From: Russell Southwell <rulee@cityscape.net>
> >Reply-To: Russell Southwell <rulee@cityscape.net>
> >To: aryasura <aryasu19@idt.net>
> >CC: "Robert J. Simmons" <rsimmons2@home.com>, datsun-roadsters
> ><datsun-roadsters@autox.team.net>
> >Subject: Re: NTFMF old roadster lingo x-mac-creator="4D4F5353"
> >Date: Wed, 15 Nov 2000 08:44:44 -0600
> >
> >you would also have to seal it completely, any moisture traped betwen the
> >two
> >would cause galvanic corrosion.
> >Russ Southwell 70 1600
> >
> >aryasura wrote:
> >
> > > Depends how bad your floor is and what kind of anchor places you
> >have....
> > >
> > > but I have fixed alot of floors (including a roadster floor) with
>strips
> > > 10"x20" of aluminum (about 1/4inch thick)
> > > Ive discovered if you rivet it to strong steel on the roadster It
>holds
> >up
> > > very well, and also has the advantage of ....
> > > NO RUST! You just have to make sure to caulk/rubberize the points
>where
> >it
> > > meets the steel body.
> > >
> > > rgds,
> > > ed
> > > 68/69 SRL 311 NYC
> > >
> > > ----- Original Message -----
> > > From: "Robert J. Simmons" <rsimmons2@home.com>
> > > To: "datsun-roadsters" <datsun-roadsters@autox.team.net>
> > > Sent: Wednesday, November 15, 2000 12:12 AM
> > > Subject: NTFMF old roadster lingo x-mac-creator="4D4F5353"
> > >
> > > > hello all
> > > >
> > > > translation "need to fix my floors". I read the thread about roll
> >bars
> > > > going thru the floors with some interest. Became a lot more
> >interesting
> > > > when I removed my seats and found the floors under them and below
>the
> > > > strengthening piece of metal rusted :-(. Anyone fixed the floors
> >under
> > > > the seats and added some extra strengthening material? Any
> > > > suggestions? I have visions of stopping suddenly and being ejected
> >like
> > > > a fighter pilot....better get a chute.
> > > >
> > > > Rob Simmons
> > > > GWNGUY
>
>_________________________________________________________________________
>
_________________________________________________________________________
|