Sounds right to me.
R Haug wrote:
> All,
> I have started to take the cam out of my U20 head. I have removed the
> rocker arm retainer springs and then the rockers. I have a cam oiler
> bar that bolts to the lower cam tower studs. It looks like I could
> unbolt these 2 nuts and then re-install then without disturbing the
> geometry of the alignment.
>
> Next is the 3 nuts that hold the cam bearing caps in place. 2 are 10 mm
> and 1 is 12 mm. The cam seems to turn freely right now. Looks like it
> is simple to unbolt these 3 nuts and the cam comes right out.
> Does this sound right?
> Bob
> 67.5
> 2L
> Moscow
--
Gordon Glasgow
http://www.gordon-glasgow.org
|