----- Original Message -----
From: "Paul" <paul@campbellsci.co.uk>
Newsgroups: alt.autos.kitcars
Sent: Thursday, August 30, 2001 10:13 PM
Subject: Rover V8 3.9 EFi Engine help
> We have a Rover V8 3.9 EFi Engine taken from a Range Rover Vogue "M"
> Reg.
>
> The Range Rover has an oil cooling radiator that connects to the
> engine block near the oil filter.
>
> We don't need to fit the oil cooler in the car we are building but we
> can't find out whether we need to loop the radiator send/return pipes,
> or fit blanks into the engine block.
>
> I have examined the block and am fairly confident I can fit blanks
> (because of the way the casting is designed), however someone else has
> told me I must fit the original oil cooler radiator pipes and loop
> them together (which I would rather not do as it looks crap).
>
> Does anyone have any experience of this engine ?
>
> Many thanks...
>
> Paul.
///
/// buick-rover-v8@autox.team.net mailing list
///
|