In a message dated 4/9/2006 11:46:39 AM Pacific Standard Time,
jhassall@blacksburg.net writes:
> Oils that meet these standards should be recommended at least
> throught the flat-tappet break-in period along with Comp Cams' Pro Cam Lube
> applied to the cam and lifter and Comp Cams' Camshaft Break-in Lube oil
> additive.'
>
> Some of the diesel oils that meet these standards are: Castrol Tection
> Extra SAE 15W-40, Chevron Delo 400 Multigrade SAE 15W-40, Mobil Delvac 1300
> Super 15W-40 and Shell Rotella T Multigrade SAE 15W-40."
A MG TC owning friend highly recommends Delo 400 for old engines...I have
been using it with success in my MG SA which has poured bearings and my
sailboat
Atomic 4 engine even tho it is a gas engine more like a tractor engine.....I
plan to use it also in the MG NA engine which also has poured bearings....It is
sometimes on sale at marine stores.
Terry in Oakland, CA
|