british-cars
[Top] [All Lists]

RE: Master Cylinder Springs

To: Triumph List <triumphs@autox.team.net>,
Subject: RE: Master Cylinder Springs
From: Randall Young <ryoung@NAVCOMTECH.COM>
Date: Thu, 19 Jul 2001 16:12:58 -0700
Good advice !  I have a return spring removed from my TR3A that looks just
like Kai's ...

BTW, as I've posted before, the TR6 clutch spring (Moss 582-065) will work
just fine in the earlier TRs with Girling (single circuit) brake and clutch
components.  I'm sure TRF also sells it, but don't have the number handy.

Randall

Kai M. Radicke wrote :
>
> This is a little thought of item, so I'm here to remind everyone now.  The
> next time you rebuild your brake or clutch master cylinders, replace the
> piston spring as a precaution!  Otherwise the following will result...
>
> http://www.pil.net/~mowogmg/tr6/cylinder-piston-spring.jpg

<Prev in Thread] Current Thread [Next in Thread>