Larry Snyder asked:
>So how do you attack [stuck fasteners]. How about a step-by-step plan?
>
>1. Try with normal tool. If stuck:
> 2. Soak with Kroil, then try with normal tool. If still stuck:
> 3. Attach plastic explosives...
I would add (around 2b) Heat a little, then apply more Kroil.
then -- Heat a lot (not red), then apply more Kroil.
I have been amazed how much good a little heat does. A small propane torch
is all that's necessary. You may want to replace the fastener if it gets
too hot.
Stan Fickes British Cars
Wireless Communications 1951 MGTD (under construction) NEMGTR 10492
Advanced Technology Group 1965 Austin-Healey Sprite (daily driver)
Apple Computer, Inc.
408 974-7653
|