>MGB rack does not take greese! It takes 90w hypoid gear oil which you put
>in by screwing off the cap on top of the rack. Do not pump greese into the
>rack. Check with your workshop manuel.
Hence the confusion. The Haynes manual shows a Zerk fitting and says to put
grease in there. Since I don't have the fitting, guess I'm suppose to put
gear oil in there. But does it then flow down into the gaiter boot?
_/_/_/ _/_/_/ _/ _/ _/_/_/ _/_/_/
_/ _/ _/_/_/_/ _/ _/ _/
_/ _/ _/ _/ _/ _/ _/_/ _/_/_/
_/ _/ _/ _/ _/ _/ _/ _/
_/ _/ _/ _/ _/_/_/ _/_/_/ colombo@fnal.gov
|