bricklin
[Top] [All Lists]

Re: Door struts

To: "bl" <bricklin@autox.team.net>
Subject: Re: Door struts
From: "High Tech Coatings" <rick@hightechcoatings.com>
Date: Thu, 11 Jan 2007 04:38:53 -0500
part# 1712-DP that's a 1.5 bore 12 " stroke pivot bottom, you need a clevis
and lock nut for it as well if you have no or original cylinders. If you
already have replacements you can screw the clevis off the old and reuse it.
The cylinders should be around $60, If I remember right the clevis is about
$10 and a buck or 2 for the nut. you will have to drive the pin out of the
bottom of the cylinder do you have a thru hole instead of a pin, easy to do.
Rick

On 1/10/07 2:29:59 PM, Joel Schneeweis (jbschneeweis@sisna.com) wrote:
> A while back some mentioned ordering new door struts for the air doors
> from
> a company named Bimba.  They also mentioned that the clevis needed to
> be
> changed on the new struts.




<Prev in Thread] Current Thread [Next in Thread>