It all depends on how your car was wired, If you want you could add a power
to 2 and a solenoid wire to either 1 or 3 depending on which is up, if 6 is
up the use 3. make sure you use a fuse on any new power wire, we don't want
to see you stuck in a burning brick cause you didn't use a fuse.
Rick
>
> > Does anyone have information on the pin outs for the door switch? In
the
> > process of replacing my carpet I found that there are six connectors and
> > only three connected on the door switches on the outside and in the
console.
> > Currently mine only has the bottom row of pins connected. I believe the
> > others may control the solenoid, but I am not sure.
> >
> > Currently on mine 4, 5 and 6 have a connection.
> >
> > 1 2 3
> >
> > 4 5 6
> >
> > I hope this will help me resolve the non working door solenoid problems
on
> > both doors.
> >
> > Greg
|