bricklin
[Top] [All Lists]

RE: Power Booster

To: "'Olenick, Jamison'" <Olenick@ssims.nci.nih.gov>,
Subject: RE: Power Booster
From: David Ebel <david.ebel@visitalk.com>
Date: Tue, 25 Apr 2000 12:46:49 -0700
Well everyone seams to doubt the proportioning valve is the problem, but it
really looks that way to me.  The brakes light is on in the car, and we know
that the drum brakes are adjusted correctly.  Its just that a very small
amount of brake fluid (and pressure) is getting to the rear brakes.  Lack of
power = power booster / lack of fluid seams to me that the valve has sensed
a drop in pressure and to keep the system running, it has diverted power to
the front and virtually shut it off to the back.  It is also interesting
that both rear brakes function (or do not rather) identically.  I believe
that I have to reset the proportioning valve - whatever that means.  Anyone
else want to shed some light?


Thanks for the experienced tips - nothing beats it!  That's why I come here
first!

Dave



-----Original Message-----
From: Olenick, Jamison [mailto:Olenick@ssims.nci.nih.gov]
Sent: Tuesday, April 25, 2000 12:32 PM
To: Bricklin (E-mail)
Subject: RE: Power Booster


Dave,
   I remember replacing the power brake booster and the master cylinder on
#1080 (75).  If I remember correctly I just used the NAPA part # the John
Blair has on the Cross-reference and it fit perfectly....although not the
easiest thing to replace. (I think that I needed an extra set of hands)
   As for your other drum problems.  I had the same problem recently on a
complete brake rebuild on a Grand-Am.  When we would try to bleed the brakes
I found that just leaving the bleeder open and holding my finger over it
till it got pressure and then closing it worked best.  If after that I would
try to bleed then the first try would be full of pressure and the second
would just dribble (and the pedal was not released before I shut the
bleeder).  NOTE: I do not claim to be a brake expert.
   Hopefully someone will be able to help you better with the rear brakes.
   My guess is that it is just an adjustment of some sort....whether inside
the drum (that adjustment screw thing where the rear shoes meet at the
bottom...or something else.  Try holding your finger over the open bleeder
and then pumping the brakes, and then close it when you get some pressure.
   I doubt the proportioning valve is the problem....FWIW

                                                                Jamie

> -----Original Message-----
> From: David Ebel [SMTP:david.ebel@visitalk.com]
> Sent: Tuesday, April 25, 2000 2:01 PM
> To:   Bricklin (E-mail)
> Subject:      Power Booster
> 
> 
> 
>       Does anyone have one, or a part number for one that fits right?  The
> rod distance is what I am having a problem with.  Thanks
> 
> Dave
> 
> -----------------------------------------
> David Joseph Ebel
> david.ebel@visitalk.com
> visitalk.com - Website Developer
> Office: (602) 850-3402 | Cell: (602) 315-9585
> Bricklin Owner #841 <www.davidebel.com>

<Prev in Thread] Current Thread [Next in Thread>