autox
[Top] [All Lists]

Re: JACircuits timer failure...

To: Mark Andy <mark@sccaprepared.com>
Subject: Re: JACircuits timer failure...
From: Scott Tengen <scott@tengen.com>
Date: Fri, 11 Mar 2005 13:48:10 -0500
Did you try disconnecting the battery all together and only powering the 
unit via the "charger".



Mark Andy wrote:

> Howdy,
>
> I was wondering if anyone had any insight as to what might be wrong 
> with our timer...
>
> At our last event, the timer first started seeing finish trips well after
> the car went through the lights.  I.e., car goes through the finish
> lights, one or two seconds passes, then the timer beeps and displays a
> finish time.  We ran a new wire out to the finish light, but when we went
> to plug it in, the timer died completely, no power, nothing.  The charger
> / power supply had the "fast charge" led lit, and it was plugged into 110
> ac the entire time.
>
> I opened the case, no loose connectors and the internal fuse visually 
> appeared fine (as did the fuse on the back).  I didn't have a meter, 
> so I couldn't check that the battery had power, whether or not the 
> fuses were _really_ ok, etc.
>
> Any ideas?  I was wondering if the battery gave up the ghost entirely 
> and that, even though it was plugged into 110 ac, the battery must be 
> working at least a little for the timer to operate?






<Prev in Thread] Current Thread [Next in Thread>