autox
[Top] [All Lists]

Re: Flat panel display question

To: Randy Walters <RandyLWalters@earthlink.net>, autox@autox.team.net
Subject: Re: Flat panel display question
From: Matt Murray <mattm@optonline.net>
Date: Sun, 11 May 2003 10:39:19 -0400
Thanks, nice write up, too. Unfortunately, Fry's has not made it out to 
Connecticut.  :^)

At 07:14 AM 5/11/2003 -0700, Randy Walters wrote:
>I bought a 17" Flat Panel TFT Monitor about 14 months ago for daily home use.
>I spent a lot of time running around to various stores but Fry's electronics
>had the largest selection all grouped together and all sharing the same 
>display
>so it was easy to compare them all in one sitting.  The economy models didn't
>look as clear as the more expensive name brand models which is to be expected,
>and the middle of the road brands and models seemed to be the best value 
>vs cost.
>One big deciding factor should be the warranty - some are 3 months while 
>others
>are 3 years.
>
>  After a lot of comparing i chose the 17" GEM GL-821A made by Scanport 
> which can be
>found today as low as $300 after rebates, or - $400 straight out.  The 
>picture looks every
>bit as good as the NECs and Philips 17 inchers that cost at least a few 
>hundred $$ more.
>It was a great deal 14 months ago when i bought it,  and even today it's 
>still a great deal
>even though prices for all brands have come down.  And Gem has a pretty 
>good warranty
>too (3 years limited parts and labor).
>
>http://www.gemca.com/gl821a.html
>
>http://www.gemca.com/lcd.html
>
>  Randy
>89 325is
>45 STX
>So Calif

Matt Murray

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Partial archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>